Surfing Jet Board efoil Motor Electric 72V / 12000 W (12KW) Motor

ABOUT AFTER LAUNCHING

Attention: Before launching, it is important to maintain a depth of at least 80 CM. you can avoid following the following steps to practice on the board: starting a lying board,kneeling board,and standing board Regarding usage: lf you are a beginner, (please make sure to wear a life jacket before experiencing!!!)

1.Power on:Install the main power switch and insert the safety key

2. Start: Hold the handle with both hands, place the upper half of the handle on the board, lightly press the handle to start the surfboard: 3. Lying on the surfboard: Keep the speed stable and let the body lie on the surfboard in a cross riding manner, holding the handrail of the board with both hands

4.Kneeling board:After adapting lower abdomen can be contracted in a timely manner and then knelt on the board body;

5. Standing board: After adapting to running and lying, you can try to put your left and right feet into shoe covers (with shoe covers installed), first put your back feet in, then put your front feet in,and then rely on leg strength to stand.

Note:

1.When the battery is only about 20% full, you should immediately return to power or use it in the nearby water area. 2. After falling into the water, immediately release the handle, the safety key will automatically come out, and the board will stop running. Do not hold onto the handle and do not let go! This will greatly increase the risk of collision.

3. lf there are significant changes in hydrological conditions during use that make it difficult to control due to loss of balance, do not attempt to use it forcefully.Please immediately release the accelerator pedal or fully release the remote control handle and dive towards the side behind the direction of the board’s movement.Otherwise,it may cause significant harm.